H1/1 - output to control relays or courtesy functions (window rollup module, sunroof, etc)
H1/2 - to 520T GRAY (15A fuse on Viper side)
H1/3 - to 2 Sirens, split wires, and place a 1A fuse on the one under hood to protect from grounding.
H1/4 - connect to the ignition wire BLACK/YELLOW (+) in the main ignition harness
H1/5 - GROUND
H1/6 - NOT USED
H1/7 - to Trunk BLUE/BLACK
H1/8 - JOIN with H1/9 to (door trigger = light green/red (-)
H1/9 - JOIN with H1/8 to (door trigger = light green/red (-)
H1/10 - another courtesy output
H1/11 - Parking light flash output RED/BLACK (+)IN DRIVERS KICK PANEL
H1/12 - used to trigger a starter interrupt relay (optional)
_________________________
"Who's house?? RUN'S HOUSE!!"
Stangeriffic2002 "Peace on earth is a cycle. You have to be willing to sacrifice 50-100K douchebags every 75-100 years in order to keep everyone else in check."
Do you have a problem you need addressed?? Use Private Message or Notify
| 
