#1700012 - 08/30/09 05:47 PM
FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
|
n8dogg455
Member
Registered: 03/28/03
Posts: 1853
Loc: Pa
|
Offline
|
|
Decided to finally clean out my closest.
Well actually my wife is making me, i would rather be => 
The last of my Competition vehicles are listed below.
All the stuff has been used, but not abused for 2 seasons.
- Like New Condition
- Original Owner, Authorized Dealer Purchased
- Adult Owned / Used
- Original Packaging / Plastic/ Foam/ Manuals/ Boxes
I have prenty of feedback on ebay, and other forums, just ask for references. I work like a store, you pay then I ship. Will Ship or Local Pickup Acceptable. Buyer to Pay Actual Shipping from 18944. UPS most likely as they Pickup daily from my Work. More Pictures availible upon Request.
Now the Good Stuff :
CDT Audio HD652 3-way Component Setup - $450
- (2) 6.5” HD-6 Woofers
- (2) 5.25” HD-5 Mid-Range Woofers & (2) 5.25” Speaker Grills
- (2) 1” Neocharged Silk Tweeter TW-25
- (2) ES/HD-300 3-Way Crossover - 24dB, “Transient Optimized” 5th order Elliptical
- (1) Image Enhancement System
- (1) Level Control Knob &(2) 1” Neocharged Silk Tweeters TW-25
- Power Handling: 200 watts RMS
- High Pass: 100 Hz
- Frequency Response: 55-20kHz
- Sensitivity: 92.3 dB
- Impedance: 4Ohm
In Depth Mounting Requirements:
http://www.cdtaudio.com/custom_components_08.htm
CDT Audio CL52 2-Way Component Setup - $200
- (2) 5.25” CL-5 Woofers & (2) 5.25” Speaker Grills
- (2) 1” Neocharged Silk Tweeter TW-25
- (2) SatNet-456 2-Way Crossover - 60dB, “Phase Perfect” 4th order Elliptical
- Power Handling: 120 watts RMS
- High Pass: 120 Hz
- Frequency Response: 65-20kHz
- Sensitivity: 91.8 dB
- Impedance: 4Ohm
In Depth Mounting Requirements:
http://www.cdtaudio.com/custom_components_08.htm
CDT Audio TW-20 3/4" Tweeters - $40/pair
- (4) Titanium Dome Tweeters
- Flush Mount Configuration
CDT Audio SatNet 560 2-Way Crossover - $50
- (2) Crossovers
- 24dB, “Transient Optimized” 4th order Elliptical
- 12 GA Wire Terminal Block
- Image Enhancement Tweeter Ready
JL Audio 450/4 Amplifier - $375
One of the best All around great amplifiers for component speakers. The Front 150 watt channels are ideal for a 3 way component set, while the rear 75 watts will make a rear set of components or rear fill round out your soundstage. This amp uses nothing but the top of the line components, and is a highly reputable company which is always an industry leader. This amp will make your music come to life ! Guaranteed to be in perfect condition, but remember please leave installation to a trained professional, use a MECP Certified Installer.
• Channels 1 and 2: • Rated Power (stereo mode): 150W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
• Rated Power (bridged mode): 300W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
• Channels 1 and 2 Crossover:
• Fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
• Channels 3 and 4:
• Rated Power (stereo mode): 75W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
• Rated Power (bridged mode): 150W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
• Channels 3 and 4 Crossover:
• Fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
• THD at Rated Power: <0.03% @ 4 ohm
• S/N Ratio*: >108.5 dB below rated power
• Frequency Response: 5 Hz-30 KHz (+0, -1dB)
• Damping Factor: >200 @ 4 ohm per ch./50 Hz
• Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS
• Differential-Balanced Input Topology: (2 pairs of inputs)
• 24dB Linkwitz-Riley Crossover selection
• Preamp Output: 2-channel (Pass-through with selectable input sourcing)
• Bass EQ: +6 dB (variable boost up to +15 dB with Remote Bass Option)
• Infrasonic Filter (Channels 1&2 only): Defeatable 24dB/octave at 30 Hz
• Speaker output connections: accept up to 8ga. wire
• +12V and Ground connections: accept up to 4ga. Wire
• Dimensions: 13.4"L x 9.25"W x 2.36"H
Edited by n8dogg455 (08/30/09 05:55 PM)
_________________________
Got rattles? Contact ANT at: www.secondskinaudio.com For all your CDT Audio, US Amps, Cadence, Alpine, Powerbass and Stinger needs or questions talk to djdilliodon.
|
|
Top
|
|
|
|
#1702375 - 09/05/09 12:26 PM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: n8dogg455]
|
guychoy
SD Newbie
Registered: 09/05/09
Posts: 2
|
|
Offline
|
|
PM sent
|
|
Top
|
|
|
|
|
#1702590 - 09/06/09 06:12 PM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: guychoy]
|
n8dogg455
Member
Registered: 03/28/03
Posts: 1853
Loc: Pa
|
|
Offline
|
|
still have everything
_________________________
Got rattles? Contact ANT at: www.secondskinaudio.com For all your CDT Audio, US Amps, Cadence, Alpine, Powerbass and Stinger needs or questions talk to djdilliodon.
|
|
Top
|
|
|
|
|
#1705224 - 09/14/09 04:19 AM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: n8dogg455]
|
n8dogg455
Member
Registered: 03/28/03
Posts: 1853
Loc: Pa
|
|
Offline
|
|
450/4 is gone.
also have a set of 20 ft streetwirez rcas that for sale...
any good offer accepted.
_________________________
Got rattles? Contact ANT at: www.secondskinaudio.com For all your CDT Audio, US Amps, Cadence, Alpine, Powerbass and Stinger needs or questions talk to djdilliodon.
|
|
Top
|
|
|
|
|
#1708596 - 09/21/09 03:57 PM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: n8dogg455]
|
guychoy
SD Newbie
Registered: 09/05/09
Posts: 2
|
|
Offline
|
|
great seller. can definitely trust this guy!
|
|
Top
|
|
|
|
|
#1718900 - 10/14/09 11:52 AM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: guychoy]
|
capcrunk
SD Newbie
Registered: 10/14/09
Posts: 3
|
|
Offline
|
|
CDT Audio SatNet 560 2-Way Crossover still for sale ?
|
|
Top
|
|
|
|
|
#1718942 - 10/14/09 12:38 PM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: capcrunk]
|
n8dogg455
Member
Registered: 03/28/03
Posts: 1853
Loc: Pa
|
|
Offline
|
|
pm'd you back
i really would want to sell the 3 way setup first, incase i find someone who wants a HD-2 way set i need those 560 xovers ....
if you can find someone interested in my 3 way HD setup, i will just give you the 560's  just cover the shipping !!
_________________________
Got rattles? Contact ANT at: www.secondskinaudio.com For all your CDT Audio, US Amps, Cadence, Alpine, Powerbass and Stinger needs or questions talk to djdilliodon.
|
|
Top
|
|
|
|
|
#1720870 - 10/18/09 05:51 AM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: n8dogg455]
|
whitedragon551
SD Ralph Wiggum
Registered: 04/20/09
Posts: 45
|
|
Offline
|
|
Still have the CDT tweets?
|
|
Top
|
|
|
|
|
#1725827 - 10/27/09 04:27 AM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: whitedragon551]
|
n8dogg455
Member
Registered: 03/28/03
Posts: 1853
Loc: Pa
|
|
Offline
|
|
still have everything but the JL amp.
Let me know if you are still interested
_________________________
Got rattles? Contact ANT at: www.secondskinaudio.com For all your CDT Audio, US Amps, Cadence, Alpine, Powerbass and Stinger needs or questions talk to djdilliodon.
|
|
Top
|
|
|
|
|
#1728389 - 11/05/09 04:49 AM
Re: FS: CDT Audio Component Sets / JL 450/4 Amp / Titanium Tweets / 2-Way Xovers
[Re: n8dogg455]
|
n8dogg455
Member
Registered: 03/28/03
Posts: 1853
Loc: Pa
|
|
Offline
|
|
bump
_________________________
Got rattles? Contact ANT at: www.secondskinaudio.com For all your CDT Audio, US Amps, Cadence, Alpine, Powerbass and Stinger needs or questions talk to djdilliodon.
|
|
Top
|
|
|
|
Moderator: $uperpuma, IamMurph, veedubb8, Thumper26
|
82754 Members
29 Forums
175105 Topics
1068743 Posts
Max Online: 754 @ 03/10/08 07:00 PM
|
|
|
