SoundDomain
Page 1 of 1 1
Topic Options
Rate This Topic
#1641613 - 03/05/09 02:36 PM Advice on covering with vinyl?
Stangeriffic2002
Massive, Throbbing
Member
**

Registered: 15/10/02
Posts: 11234

Offline
I have a false floor that I've built for my trunk so needless to say it has some odd shapes. Are there any tutorials out there that will help me with how to make sure the sections of the floor have clear corners? I used spray adhesive for the majority of it but now I'm coming to the point where I'm stapling the extra around the back and am having trouble getting the corners to look clean.

At $16.99 a square yard for the vinyl I'd rather not screw it up...lol
_________________________
Offricial SDOT Thread Derailer

(c) 2002-2009 Stangeriffic2002

Top
#1641629 - 03/05/09 03:17 PM Re: Advice on covering with vinyl? [Re: Stangeriffic2002]
SubNit
T.S.A.
SD First guy voted off Survivor
****

Registered: 21/03/08
Posts: 985
Loc: 3rd Coast

Offline
Use a razor blade and cut the vinyl on the backside so that you form a bunch of flaps. That'll allow you to pull the trouble sections flat without pulling the whole area

Working with vinyl is a pain in the ass, especially when you don't have rounded corners
_________________________
www.sundownaudio.com

References: Just ask

Top
#1641822 - 04/05/09 07:08 AM Re: Advice on covering with vinyl? [Re: SubNit]
*316Flattop*
*flexes muscles*
buck fiddy
**

Registered: 23/02/04
Posts: 59748
Loc: Pittsburgh Steelers

Offline
ouch, a couple years ago joann fabrics had it for $5.99 a sq yd \:confused\:
_________________________
maino -- seems like they don't love you til you dead yo

Top
#1641967 - 04/05/09 11:58 AM Re: Advice on covering with vinyl? [Re: *316Flattop*]
93_chevy
fabricator
Member
***

Registered: 01/07/02
Posts: 3520
Loc: San marcos, TX

Offline
you gotta use upholstery grade contact cement...

rattle can stuff is no good man...

try weldwood contact cement, you can paint it on if you dont have a compressor...

a heat gun is also your friend
_________________________
alpine 9835
RF 4004
total 500.1
jl w3v310's sealed
oh she bangs

Friend's install-done by urs truely
http://www.sounddomain.com/memberpage/599297/2

Top
#1643274 - 06/05/09 08:08 PM Re: Advice on covering with vinyl? [Re: *316Flattop*]
dr.db
SD Ralph Wiggum


Registered: 20/01/09
Posts: 44
Loc: Sactown

Offline
 Originally Posted By: *316Flattop*
ouch, a couple years ago joann fabrics had it for $5.99 a sq yd \:confused\:
You can use some cheap stuff...but you will not be happy with the way it stretches..I use the Allante brand stuff on a lot of projects..soft feel,stretches very nice and even...but as with ALL vinyls..you have to heat up an area greater than just the area your working..no distorting textures and such..

Top
#1644945 - 10/05/09 09:51 AM Re: Advice on covering with vinyl? [Re: dr.db]
sqcomp
SD Roadrunner (Sanus Domanus Ultra-Sonicus Ad Infinitum)


Registered: 03/07/99
Posts: 3568
Loc: VBC Baghdad, Iraq

Offline
This adhesive is great for vinyl. I use it for Ensolite as well. Even though it is "spray grade" it still works just fine when you apply it with a chip brush.

...I say that as you see the air line right next to the can...

_________________________
Who cares What I use?
Remember your five "P's"
Remember the KISS principle
NEVER forget about Mr. Murphy
-Be PATIENT!-
This is why the car sounds great!

Top
#1673780 - 05/07/09 01:32 AM Re: Advice on covering with vinyl? [Re: sqcomp]
Tambiengabriel
Member
***

Registered: 15/09/06
Posts: 190
Loc: Southern California

Offline
That Weldwood is the way to go. If you want the easiest vinyl to work with select products has the heat formable that is incredible.By far the most forgiving, but I could never do curves with the cheap stuff. It is so expensive though. But I say why is there never enough time to do right the first time, but always time to do it over again?
_________________________
2008 Mercedes Benz C300
RF 360.2
JL Audio 900/5
Hybrid Audio Legatia L1 Pro
Hybrid Audio Letatia L4
Hybrid Audio Legatia L6
JL Audio 12w6v2




Top
Page 1 of 1 1


Moderator:  deaf tones, SuperJay, Thumper26, SnakeBite 
Hop to:
Search
Google Search
SoundDomain News
Who's Online
9 registered (MaddShadez, LumbermanSVO, bcg187, MartyV1, MacLeod, Architect4122, 2 invisible) and 1 anonymous users online.
Newest Members
theprotectors4u, napleseyes, remeolb, charlesshap, jphascarshere
82715 Registered Users
Top Posters
59748
*316Flattop*
45083
Thumper26
42559
Subwoofer Tool
41009
SuperJay
36491
ItWuzCryptic
35905
G H O S T
35521
IamMurph
27572
OmarC
27171
Bastard Kid Kris
25696
imtfox
Forum Stats
82715 Members
29 Forums
174888 Topics
1063852 Posts

Max Online: 754 @ 10/03/08 07:00 PM
Site Sponsors
Car Blog
Car Videos
Celebrity Cars
Sorority Clothing

Generated in 0.032 seconds in which 0.004 seconds were spent on a total of 14 queries. Zlib compression disabled.

Copyright © 1998-2008 CarDomain Network, Inc. All rights reserved.