#1495293 - 20/09/08 03:57 PM
Adding extra sirens to viper 5900
|
96Blazer
SD Newbie
Registered: 23/07/08
Posts: 11
|
Offline
|
|
I'll probably be installing my Viper 5900 next weekend once I get the other stuff I ordered for it. Will be installing it in a 96 Blazer.
I looked at the directions for it a little bit and the manual for my Blazer to see where the wires are that I need. I was going to install the siren that came with the 5900 but also I got a siren with the battery back up in it. Was going to put those both under the hood some where once I find a spot. Probably try to put one on each side. Next I was going to put two, maybe 3 of the DEI 513T mini piezo sirens on the inside of vehicle. One hidden in the back close to my amps. Then I thought about putting one on each side of the dash, hidden up in it. Probably overkill but I like overkill. lol
So how would the sirens get wired up? Can they all be wired together or do they need a relay?
|
|
Top
|
|
|
|
|
#1495348 - 20/09/08 06:31 PM
Re: Adding extra sirens to viper 5900
[Re: 96Blazer]
|
IamMurph
Security Guy
[ADMIN]
Registered: 30/10/01
Posts: 30545
|
|
Offline
|
|
You will need a relay for the extra sirens.
|
|
Top
|
|
|
|
|
#1495364 - 20/09/08 06:59 PM
Re: Adding extra sirens to viper 5900
[Re: IamMurph]
|
96Blazer
SD Newbie
Registered: 23/07/08
Posts: 11
|
|
Offline
|
|
You will need a relay for the extra sirens.
Just one relay for all the sirens?
|
|
Top
|
|
|
|
|
#1495365 - 20/09/08 07:00 PM
Re: Adding extra sirens to viper 5900
[Re: 96Blazer]
|
IamMurph
Security Guy
[ADMIN]
Registered: 30/10/01
Posts: 30545
|
|
Offline
|
|
Yes
|
|
Top
|
|
|
|
|
#1495371 - 20/09/08 07:12 PM
Re: Adding extra sirens to viper 5900
[Re: IamMurph]
|
96Blazer
SD Newbie
Registered: 23/07/08
Posts: 11
|
|
Offline
|
|
Thanks
|
|
Top
|
|
|
|
|
#1513147 - 17/10/08 06:58 PM
Re: Adding extra sirens to viper 5900
[Re: 96Blazer]
|
19Blazer96
SD Newbie
Registered: 17/10/08
Posts: 3
|
|
Offline
|
|
Had a problem with signing in so had to make a new username.. 
I finally got started on this the other day. As of today I got all of the wires(sirens) ,except the tach wire ran from under the hood to inside of the vehicle. Their was already some 8 gauge wire ran from the battery to inside the vehicle to under the dash. I was going to use this wire for the alarm brain 12v constant plus all of the other sensors, relays etc. that need 12v. Is it OK to use this wire for them all? All of the 12v wires that run into this one will have it's own fuse and the 8 gauge has it's own fuse at the battery. What size fuse should I put at the battery?
Here is a list of everything that is getting installed. Some of it I was going to use in my last car but never did so it's new in pack.
Viper 5900
DEI 508D Dual zone motion sensor
DEI 506T Audio sensor
DEI 520T Battery Back up
DEI 530T Power window system for both front windows
DEI 515R Back up siren/battery (have 2 of these but only have 1 installed right now, probably only use 1 unless someone suggest using the 2nd one.)
DEI 513T mini piezo siren (I have 3 of these)
I'll probably start on the inside tomorrow. Today I was trying to figure out where to put everything etc. Also was going through all the wires from the alarm and seeing what I need to use and what I dont need. One harness I'm not sure about is the H2 harness. it has the light green/black(factory disarm),gray/black(wait to start input), green/black(factory arm), violet.black(200ma channel 4 output), white/black(200ma channel 5 output), light blue(2nd unlock output).
Most of it sounds like it's for hooking up to a factory alarm? I wasnt going to use channel 4 or 5 ouput right now but what is some things that I could use them for?
Next thing is I plan on hiding the alarm brain in the center console. The shock sensor wire will need to be longer. Is is OK to make them longer? Or would it be Ok to just mount it some where in the front of the center console? I have my alpine processor hidden under the storage compartment area in the console. This will be taken out in the spring and put in the back of car but will all of the wires running close together like that cause any interferance?
Last question is about the 508D. How does this get hooked up? I know it just ties in with the green and blue wires on the shock sensor? Only thing is with the directions for 506T audio sensor. It comes with a new wire harness that connects the shock sensor and 506T together and it just plugs into the alarm brain. With it like this their is only about an inch of green wire sticking out of the one sensor box. I saw a few people mention about diodes in other posts. Will I need one to hook up the 508D with the shock and 506T audio sensor? Or is their a better way to hook up these 3 sensors so the all work right?
Sorry about all the questions. I'm just trying to get it all sorted before I start installing it all.
Thanks
|
|
Top
|
|
|
|
|
#1513441 - 18/10/08 01:23 PM
Re: Adding extra sirens to viper 5900
[Re: 19Blazer96]
|
19Blazer96
SD Newbie
Registered: 17/10/08
Posts: 3
|
|
Offline
|
|
After reading the directions for the 3rd time on the DEI 508D. It looks like I can just twist the blue and green wires together from the 508D and wire them to the blue wire on the main harness.
|
|
Top
|
|
|
|
|
#1513565 - 18/10/08 04:57 PM
Re: Adding extra sirens to viper 5900
[Re: 19Blazer96]
|
IamMurph
Security Guy
[ADMIN]
Registered: 30/10/01
Posts: 30545
|
|
Offline
|
|
I would use diodes to isolate the single when using multiple sensors.
|
|
Top
|
|
|
|
|
#1513575 - 18/10/08 05:20 PM
Re: Adding extra sirens to viper 5900
[Re: IamMurph]
|
19Blazer96
SD Newbie
Registered: 17/10/08
Posts: 3
|
|
Offline
|
|
I would use diodes to isolate the single when using multiple sensors.
A diode on the 508D? Where can I get them from?
Also the harness I mentioned above. What all would that be used for. Don't think I need it right now but could be wrong...
|
|
Top
|
|
|
|
|
#1513576 - 18/10/08 05:23 PM
Re: Adding extra sirens to viper 5900
[Re: 19Blazer96]
|
IamMurph
Security Guy
[ADMIN]
Registered: 30/10/01
Posts: 30545
|
|
Offline
|
|
Yes H2 is only needed if you need one of those outputs. As for the diodes, radio shack 1 amp.
|
|
Top
|
|
|
|
Moderator: IamMurph, Rick7079, SnakeBite
|
81236 Members
29 Forums
183162 Topics
1269701 Posts
Max Online: 754 @ 10/03/08 07:00 PM
|
|
|
