Okay I have an 02 VW Jetta with a Viper 791XV. With the stock alarm I had progressive unlock (hit unlock one, the driver's door unlocks, hit unlock again, all doors unlock). When I had the 791XV installed they just set it to double pulse on unlock.
I was looking over the installation manual randomly today and I noted that I could setup Ch.4/5 to do second unlock output (progressive unlock).
H2/4 WHITE/BLACK channel 5 output
Second unlock output: This output can also be programmed to provide a second unlock pulse whenever the
disarm button is pressed within 15 seconds after disarming the system. This setting could be used to unlock the passenger doors when installing progressive door locks, for instance.
Is this a simple one wire tap to get this to work? If so, does anyone have any info on which wire I would need to tap. Thanks in advance!
_________________________
02' JETTA 1.8T CURRENTLY RUNNING...
HU: CarPC
Front/Rear: Monsoon Premium
Amp(Speakers): Monsoon Premium
Sub: RF Power HX2
Amp(Subs): Brutus BX1500D
Security: Viper 791XV
